Two-bay USB Hard Drive Card Reader Multi-Function HDD Docking Station IDE SATA

Description

USB 3.0 to SATA Dual Bay External Hard Drive Docking Station with Offline Clone
Wavlink - Bringing Technology to Life
USB3.0 Docking station launching brings data transmission to a new stage. The modest triangle design shows an exquisite art. The silver LOGO makes it a strong brand and leads the fashion. USB3.0 has a super speed connector that can speed up to 5GB/s. It is 10 times faster than USB2.0 and greatly improves the stability of transportation and the efficiency of energy. Fast installation SATA hard disk without any drives and compatible with USB2.0 1.1 fast speed device make a great combination to occupy the market.
Big Function
Wavlink USB 3.0 Dual Bay HDD/SSD Storage Docking Station is the perfect solution for managing your 2.5 or 3.5 HDD & SSD without any tools or special software. After connecting it to your computer or laptop, you can do many things such as formatting, file transfer, data recovery or drive imaging at Super Speed USB 3.0 data transfer rates.
Offline Clone Function
No need USB connection to operate Clone function and copy mass data without PC, the process will show on the LEDs light flash..
Main Chipset:
Jms561u high-performance chipset, more fast write and read speed, excellent cooling and stable.
Designed for Easy Use
The dock features a top-loading, toaster-style design that makes it easy to insert your drives. The vertical cooling design also has optimized heat dissipation effect. LED indicators show, at a glance, the status of the duplication process, including the HDD status and clone progress.
Super speed Transfer Rates
:
USB 3.0 has a super speed connector that can speed up to 5GB/s, it
is ten times of USB 2.0 and greatly improves the stability of transportation and the efficiency of energy costing.
Backward fit for USB 2.0 and USB 1.1
Appearance
:
Premium workmanship, smoothly surface, fashionable and artistic performance, not only a dock, but also a decoration on your desk at home or office.
Material
:
Adopts high-strength ABS plastic material, High impact-resistance, Excellent heat-and-cold resistance, best environmental performance.
Strong Power Supply System Requirements
Equipped with 36W power adapter, it can easily meet the 2×8TB power supply demand. Never troubled for shortage of power supply.
Use Steps
:
1, Ensure the Power Switch on the rear is in the OFF Position and inserted properly.
2, Insert the Source HDD in the rear near the power plug and the Target HDD in the FRONT.
3, Power on the Dock and wait until the blue lights labeled Source and Target on the front of the unit are both on solid.
4, Press the button until both the blue Source and Target HDD lights flash. Then release the button. (Cloning is now ready)
5, Press the button again to start the cloning process. The progress will be shown on the front panel.
6, When all the progress lights turn off, the cloning process is completed.
7, Turn off the power button and then remove the drives.
Notice:
HDD SDD are not included.
A few hard drives may require more power to start up than the usual disk, and you may need a adapter with more power to support two hard drives at the same time.
The capacity of Target HDD must be larger than Source Disk’s.
Do not try to insert or withdraw HDD or SSD when another hard drive running.
Any bad sectors on the drives in use may prevent duplicator and cause overheating, which damages to the station.
A driver is needed for OTB function. Since Mac cannot be compaitble with the driver, Mac cannot support OTB.
✅This 334U also supports cloning when connected to the computer, of course, offline cloning is also OK
✅The capacity of the source disk must be smaller than the capacity of the target disk. After cloning, the target disk will have the same capacity as the source disk. The remaining capacity of the target disk needs to be repartitioned to display
System Requirements
:
Windows 2K/XP/2003/Vista/7/8 with the latest Service Packs
PowerMac G5, Mac Book Pro or Mac Pro
Mac OS X,10.4.8 (or later) and Linux
Specification:
1.Voltage: 100~240V
2.Operating Temperature: 0°C~40°C
3.Storage Temperature: -10~70°C
4.Power Plug: UK/EU/US/China/Australia(Option)
5.Power Supply: 12V/3A
6.Port: USB 3.0 SATA DC
7.Processor: 2.0Ghz core2
What’s in the package?
1 x Dual Bay SATA HDD Docking Station
1 x 12V 3A Power Adapter
1 x USB3.0 Cable
1 x User's Manual